Non-contact liquid parts of the technical indicators  

Locking ring — Steel, zinc phosphate polished  

Electronic switch parts — Brass  

Plastic parts — Nylon or PVC  

Liquid-contact parts  

Spring — Stainless steel  

Magnet — Neodymium, nickel-plated  

Housing — 17-7PH, Pressure resistance — 125% of sensor range  

Sealing O-ring — Standard BUNA N (optional: EPR, Viton, Silicone, Neoprene, etc.)  

Locking composite part — Loctite #277  

Interface — Brass  

Body — Brass  

Differential pressure switch adjustment (if adjustable on-site)  

For this model, after loosening the locking ring, you can turn the electronic switch part clockwise to lower the set point, or counterclockwise to raise the set point. Keep the electronic switch part stationary, tighten the locking ring, and check the pressure setting. Repeat the process if necessary.  

Setting options  

Pressure switches are usually adjustable on-site, but you can also order factory-set or factory-set and locked versions.  

Temperature range  

-65°F to 225°F (-54°C to 107°C)  

At temperatures below -10°F or above 125°F, the set point may drift up to 2%.

Cyclic motion sensor and electronic switch

No more than 22 actions per minute

Weight Pressure Connection

About 243g (standard 'W3' connector) 1/4” Tube With Swagelok Fittings (Standard).